Casio 3459 User Manual

●
Configuring the Summer Time Setting
1.
Y
Tap the “G-SHOCK Connected” icon.
2.
X
Hold down (C) for about three seconds
until
e
and [CNCT] flash on the display.
When a connection is established
between the watch and phone,
e
and
[CNCT] will stop flashing.
●
If connection fails for some reason, [NG]
will appear on the display momentarily
and then the watch will return to the
Timekeeping Mode.
Trying to connect Connected
3.
Y
Perform the operation shown on the
phone screen to select a summer time
setting.
●
“Auto”
The watch switches between standard
time and summer time automatically.
●
“OFF”
The watch always indicates standard
time.
●
“ON”
The watch always indicates summer
time.
Note
●
While the summer time setting is
“Auto”, the watch will switch
between standard time and summer
time automatically. You do not need
to switch between standard time and
summer time manually. Even if you
are in an area that does not observe
summer time, you can leave the
watch’s summer time setting as
“Auto”.
●
Changing the time setting manually
with a watch operation will cancel
auto standard time/summer time
switching.
●
For information about summer time
periods, refer the “Summer Time
Table” or G-SHOCK Connected.
●
Swapping Your World Time and Home
Time
1.
Y
Tap the “G-SHOCK Connected” icon.
2.
X
Hold down (C) for about three seconds
until
e
and [CNCT] flash on the display.
When a connection is established
between the watch and phone,
e
and
[CNCT] will stop flashing.
●
If connection fails for some reason, [NG]
will appear on the display momentarily
and then the watch will return to the
Timekeeping Mode.
Trying to connect Connected
3.
Y
Perform the operation shown on the
phone screen to swap your Home Time
with your World Time.
Note
●
Auto time adjustment does not work
for 24 hours after swapping of the
Home Time and World Time.
Phone Finder
You can use phone finder to trigger a tone on
the phone to make it easy to find. The tone is
forced to sound even if the phone is in vibrate
mode.
Important!
●
Do not use this function in areas
where phone call tones are
restricted.
●
The tone sounds at a high volume.
Do not use this function when
listening to phone output over
earphones.
1.
X
If the watch is connected with a phone,
press any button to terminate the
connection.
Connected After disconnection
2.
X
If the watch is in any mode besides the
Timekeeping Mode, hold down (C) for
about two seconds to enter the
Timekeeping Mode.
3.
X
Hold down (D) for about five seconds
until
e
and [FIND] flash on the display.
The phone will sound a tone when it
establishes a connection with the watch.
●
It will take a few seconds before the
phone tone sounds.
Searching for the
phone
Preparing to search for
the phone
4.
X
Press any button to stop the tone.
●
You can press any watch button to stop
the phone tone only during the first 30
seconds after it starts to sound.
Configuring Watch Settings
Alarm time, timer start time, and other settings
can also be configured using G-SHOCK
Connected.
1.
Y
Tap the “G-SHOCK Connected” icon.
2.
X
Hold down (C) for about three seconds
until
e
and [CNCT] flash on the display.
When a connection is established
between the watch and phone,
e
and
[CNCT] will stop flashing.
●
If connection fails for some reason, [NG]
will appear on the display momentarily
and then the watch will return to the
Timekeeping Mode.
Trying to connect Connected
3.
Y
Select the setting you want to change
and then perform the operation shown on
the phone screen.
Operation Guide 3459
9

Casio 3459 Specifications

General

Brand	Casio
Model	3459
Category	Watch
Language	English