EasyManuals Logo
Home>Casio>Watch>5601

Casio 5601 User Manual

Casio 5601
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
Using the Timer
1. Enter the Timer Mode.
l
Navigating Between Modes
2. Use the operations below to perform a
timer operation.
A
A
A
(Time up)
Resume
Pause
(Countdown starts)
Start
A beeper will sound for 10 seconds to
let you know when the end of a
countdown is reached.
To reset a paused countdown to the
start time, press (C).
3. Press any button to stop the tone.
Alarms and Hourly Time
Signal
The watch will beep when an alarm time is
reached. You can set up to five different
alarms. The hourly time signal causes the
watch to beep every hour on the hour.
The beeper will not sound if battery power
is low.
Configuring Alarm Settings
1. Enter the Alarm Mode.
l
Navigating Between Modes
2. Use (A) and (C) to display the number
([AL1] to [AL5]) of the alarm whose
settings you want to change.
Alarm number
Alarm time
3. Hold down (D) for at least two seconds.
Release the button when the hour digits
start to flash.
The (alarm) indicator is displayed
when any alarm is turned on.
Hours
4. Use (A) and (C) to change the hour setting.
If you are using 12-hour timekeeping,
[P] indicates p.m.
5. Press (E).
This causes the minutes digits to flash.
Minutes
6. Use (A) and (C) to change the minute
setting.
7. Press (D) to exit the setting screen.
8. Hold down (E) for at least two seconds to
return to the Timekeeping Mode.
To stop the alarm
To stop the alarm after it starts to sound when
an alarm time is reached, press any button.
Note
A beeper sounds for 10 seconds when
an alarm time is reached.
You can also use CASIO WATCHES
to configure alarm time settings.
Configuring the Hourly Time
Signal Setting
1. Enter the Alarm Mode.
l
Navigating Between Modes
2. Press (A) or (C) to display the hourly time
signal screen ([SIG]).
3. Press (D) to toggle the hourly time signal
between enabled (on) and disabled (off).
(hourly time signal) is shown on the
display while the hourly time signal is
enabled.
Note
You can also use CASIO WATCHES
to configure the hourly time signal
setting.
Operation Guide 5601
29

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Casio 5601 and is the answer not in the manual?

Casio 5601 Specifications

General IconGeneral
BrandCasio
Model5601
CategoryWatch
LanguageEnglish

Related product manuals