Playing with Different Tones
EN-11
To adjust the metronome volume
You can perform the following procedure at any time,
regardless of whether or not the metronome is
sounding.
1.
While holding down the FUNCTION button,
use the Metronome Volume keys to specify a
volume value in the range of 0 to 42.
• For details about using the keyboard keys for
settings, see “Keyboard Keys Used for Configuring
Settings” on page EN-21.
• Each press of the + and – key raises or lowers the
metronome volume value by 1.
• To return to the initial default setting, press + and –
at the same time.
You can split the keyboard in the center so the left and
right sides have the same range. The left outer pedal is
the left side damper pedal, while the right outer pedal
is the right side damper pedal.
The left and right side keyboards have virtually the
same range. The left pedal operates as the left side
damper pedal, while the right pedal is the right side
damper pedal.
The Duet Mode is the perfect way to conduct lessons,
with the teacher playing on the left side as the student
playing the same song on the right side.
• Only the damper pedal for the right side keyboard
supports half-pedal operations.
1.
Select the piano tone you want to use for the
duet.
Example: GRAND PIANO 1 (BRIGHT)
2.
To cycle between the Duet Mode settings
below, hold down the FUNCTION button and
press the Duet Mode key.
Off
On
Pan: Outputs left side keyboard tone from the left
speaker and right side keyboard tone from the
right speaker.
• The Octave Shift and Transpose settings cannot be
changed while On or Pan is selected for the Duet
Mode setting.
• While “Pan” is selected for the Duet Mode settings,
the Hall Simulator, Reverb, and Chorus settings
cannot be changed.
Splitting the Keyboard for
Duet Play
Keyboard
Split point
Left keyboard Right keyboard
(middle C)(middle C)
Pedals
Left side damper pedal
Left and right side damper pedal
Right side damper pedal
To Next Page
Loading...
Need help?
General
