5
Selecting Icons and Entering Modes 2
3. Use the f and c cursor keys to move the highlighting to the item whose
setting you want to change.
4. Press the function key (1 to 6) that is marked with the setting you want to
make.
5. After you are finished making any changes you want, press J to return to
the initial screen of the mode.
k Set Up Screen Function Key Menus
This section details the settings you can make using the function keys in the set
up display.
uMode (calculation /binary, octal, decimal, hexadecimal mode)
•{Comp} ... {arithmetic calculation mode}
•{Dec}/{Hex}/{Bin}/{Oct} ... {decimal}/{hexadecimal}/{binary}/{octal}
uFunc Type (graph function type)
•{Y=}/{r=}/{Parm}/{X=c} ... {rectangular coordinate}/{polar coordinate}/
{parametric coordinate}/{X = constant} graph
•{Y>}/{Y<}/{Y }/{Y } ... {y>f(x)}/{y<f(x)}/{y≥f(x)}/{y≤f(x)} inequality graph
• The v key inputs one of three different variable names. Which variable
name it inputs is determined by the {Func Type} setting you make.
uDraw Type (graph drawing method)
•{Con}/{Plot} ... {connected points}/{unconnected points}
uDerivative (derivative value display)
•{On}/{Off} ... {display on}/{display off} while Graph-to-Table, Table & Graph,
andTrace are being used
uAngle (default unit of angular measurement)
•{Deg}/{Rad}/{Gra} ... {degrees}/{radians}/{grads}
P. 75
P. 123
P. 125
P. 126
P. 128
P. 129
P. 177
P. 209
P. 14
12345
~
To Next Page
Loading...
Need help?
General
