Casio CT-S300 User Manual

Part III
System Message
13 Active Sensing
Message Format: FEH
Receive Once this message is received, the Active Sensing mode is entered. If no MIDI message is
received for a specified amount of time, voices being sounded by this Instrument’s sound source are
released, the controller is reset, and the Active Sensing mode is exited.
14 System Exclusive Message
Message Format: F0H....F7H
The Instrument sends and receives universal system exclusive messages.
14.1 Universal Real Time System Exclusive Message
Message Format: F0H 7FH....F7H
14.1.1 Master Volume
Message Format: F0H 7FH 7FH 04H 01H llH mmH F7H
ll: LSB Value(Send:00H, Receive:Ignored)
mm: MSB Value
Receive Receipt changes the Master Volume.
14.1.2 Master Fine Tuning
Message Format: F0H 7FH 7FH 04H 03H llH mmH F7H
ll: LSB Value(Note1)
mm: MSB Value(Note1)
Note1 : For information about the relationship between setting values and send/receive values, see “15.4 Fine Tune Setting
Value Table” in “IV Setting Values and Send/Receive Values” of this document.
Transmit This message is sent when the Tuning setting is changed.
Receive Receipt changes the Tuning setting.
14.1.3 Master Coarse Tuning
Message Format: F0H 7FH 7FH 04H 04H llH mmH F7H
ll: LSB Value(Send:00H, Receive:Ignored)
mm: MSB Value
15

Casio CT-S300 Specifications

General

Brand	Casio
Model	CT-S300
Category	Synthesizer
Language	English