E-130
Using the Function Menu
The function menu includes settings that normally need to be
accessed relatively infrequently, such as overall tuning,
equalizer, touch response, local control on/off, etc. It also
includes some memory card operations (format, etc.).
This section explains function menu operations. For details
about specific function menu items, see “Function Menu
Settings” (page E-131).
1.
Press the R-13 (FUNCTION) button.
• This displays the function menu like the one shown
below.
2.
To adjust the “Tune” (Tuning) and “EQ”
(Equalizer) settings, use the R-17 (t, y)
buttons to move the 0 to the setting you want
to adjust, use the dial or the R-14 (–, +) buttons
to change the setting. The currently selected
setting will also be indicated by thick brackets
(%).
• Pressing the R-14 (–, +) buttons at the same time
returns the setting to its initial default.
• Changing the tuning value does not affect audio
playback (page E-126).
3.
The setting items from “Performance” and
below are groups that include multiple setting
items. Use the following procedure to change
the settings of the items in each group.
R-18R-18
C-17C-17
R-15R-15
R-17R-17
R-13R-13
R-16R-16
R-14R-14
L-3L-3
Using the Function Menu
To change the setting of a function menu
item
(1) Use the R-17 (t, y) buttons to move the 0 to the
desired group name and then press the R-16 (ENTER)
button.
• This displays the items included within the group.
(2) Use the R-17 (t, y, u, i) buttons to move the 0
to the setting you want to change.
(3) Use the dial or the R-14 (–, +) buttons to change the
setting value.
• Pressing the R-14 (–, +) buttons at the same time
returns an item to its initial default setting.
(4) To return to the function menu, press the R-15 (EXIT)
button.
Example: Performance group
CTK7300IN_e.book 130 ページ ２０１３年７月１９日 金曜日 午後１２時１分
To Next Page
Loading...
Need help?
General
Weight and Dimensions
