Casio CZ-3000 User Manual

*
PART 3
*
K
With the CZ-3000,
two
timbres can be
assigned to the
upper and lower ranges of the key-
board.
The
split point of the
keyboard and the
individual volumes of the
two timbres
can
be
freely set, and
effects can
be
set
to ON and
OFF.
KEY
SPLIT
SETTING
(0 Press the KEY
SPLIT key in
the Mode Select
Section.
I
jtki.
<LCD>
HIMIVAI
ItowmiiIketjui-
:
:
:;m
LEU=15
l....bU
:::::
J.
SPLIT
POINT
=
30
I
LOWER
timbre level
UPPER
timbre level
(1-15)
(1-15)
2)
Use the
CURSOR keys to
move the cursor to
the
SPLIT POINT
value. Use
the
VALCJE
keys to set the
value within a
range of 1 through
60. This
determines
the split
point.
SPLIT
POINT
=
30
(33 Use
the
E
CURSOR key to
move the
cursor to the LOWER
LEVEL value. Here, the
LOW-
ER
timbre
and
volume
level are set.
'Select
one
of the timbres from
the
PRESET or
MEMORY
banks in the
Programmer
Section. The timbre
selected will be playable
to the
left of the
split point.
•The
VALUE keys in
the Data Entry
Section are used to
set the volume
level
within
a
range
of 1 through 15. A
setting
of
15
represents
maximum volume.
(DOse the
E
CCRSOR key to
move the cursor to the
UPPER LEVEL value.
Select
the
timbre
and
set
the volume in the same
way as
for the LOWER
LEVEL.
How
the keyboard is split for simultaneous,
separate
play of two
timbres.
3 KEY
SPLIT
MODE
Z9

Casio CZ-3000 Specifications

General

Brand	Casio
Model	CZ-3000
Category	Synthesizer
Language	English