Casio EX-ZS10RD User Manual

102
Using the Camera with a Computer
IMPORTANT!
• Recorded images are transferred over wireless LAN. Do not use the Eye-Fi card or
turn off Eye-Fi card communication (page 106) when on an aircraft or in any other
location where use of wireless communication is limited or prohibited.
• Loading an Eye-Fi card will cause the Eye-Fi indicator to
appear on the monitor screen. Its transparent or not transparent
appearance indicates the communication status as shown below.
• A communication icon will appear on the monitor screen while image data
transfer is in progress.
• The camera’s Auto Power Off (page 111) function is disabled while image data
transfer is in progress.
• A confirmation message will appear on the monitor screen if you try to turn off the
camera while image data transfer is in progress. Follow the instructions in the
messages (page 134).
• Transfer of a large number of images can take some time to complete.
• Depending on the type of Eye-Fi card you are using and its settings, images on the
Eye-Fi card may be deleted following image data transfer.
• When recording a movie to an Eye-Fi card, it can take too much time to record
data, which can result in breaks in the image and/or audio.
• Proper Eye-Fi card data communication may not be possible due to camera
settings, battery level, or operating conditions.
• Use of an Eye-Fi X2 card is not recommended.
Transparent
Access point cannot be found or no
transferable image data exists.
Not transparent Image transfer in progress
Flashing Searching for access points

Casio EX-ZS10RD Specifications

General

Brand	Casio
Model	EX-ZS10RD
Category	Digital Camera
Language	English

Summary

Read this first!

General Guide

Camera Overview

Identifies and explains the physical components of the camera.

Quick Start Basics

CASIO Camera Capabilities

Details the camera's main features like Face Detection, Anti Shake, BEST SHOT.

Battery Charging

To load the battery

Step-by-step guide on how to insert the battery into the camera.

Charge the Battery

Instructions for charging the camera's battery using the USB-AC adapter.

Turning the Camera On and Off

To turn power on

Details how to power on the camera in REC or PLAY mode.

To turn off the camera

To shoot a snapshot

Snapshot Tutorial

Using the Control Panel

Explains how to use the Control Panel to configure various camera settings.

Using Face Detection (Face Detection)

Shooting with Zoom

To record a movie

Advanced Settings

Using On-screen Menus

Explains navigation and operation of the camera's menu system.

REC Mode Settings (REC)

Selecting a Focus Mode (Focus)

Details different autofocus modes like Auto, Macro, Infinity, Manual.

Anti-Shake Feature

Using the Camera with a Windows Computer

Viewing and Storing Images on a Computer

Using the Camera with a Macintosh

Setting the Camera’s Clock (Adjust)

Formatting Built-in Memory or a Memory Card (Format)

Resetting the Camera to Factory Defaults (Reset)

Appendix

Precautions during Use

General safety guidelines for operating the camera.

Data Error Precautions

USB-AC adaptor Handling Precautions

Power Supply

Charging

To replace the battery

Instructions for removing and installing the camera battery.

Using a Memory Card

To replace the memory card

Instructions for removing and inserting memory cards.

Reset Initial Default Settings

Troubleshooting Guide

Troubleshooting

A comprehensive guide to troubleshooting common camera problems.

Display Messages

Specifications

Lens/Focal Distance

Zoom

Focusing