PLAYING AN AUDIO FILE (EX-M1 Only)
98
● To skip to the beginning of the next track
Press the [ ] button (remote controller beeps).
To keep skipping forward, press the [ ] button multiple
times, or hold down the [ ] button (remote controller
beeps). The current track number is shown on the LCD.
● To stop playback
Press the [ ] button (remote controller beeps).
● To adjust volume
Press the [+] or [–] volume buttons to adjust volume to the
desired level. The LCD shows the current volume level.
IMPORTANT!
• You cannot use fast forward, fast reverse, or skip
while the current volume level is shown on the LCD.
● To turn off power
Press the camera’s power button.
• Camera power also turns off automatically if you do not
perform an operation for about 10 seconds after play-
back is stopped.
Basic Remote Controller Operations
● To start playback
Press the [ ] button. The remote controller beeps to
indicate that playback has started.
• Pressing the [ ] button while the camera is off turns
on power and starts playback.
● To pause playback
Press the [ ] button (remote controller beeps).
Pressing the [ ] button resumes playback (remote
controller beeps).
• If you leave playback paused for about two minutes, the
camera and remote controller turn off automatically.
● To fast forward the playback
Hold down the [ ] button for a few seconds until fast
forward starts.
● To fast reverse the playback
Hold down the [ ] button for a few seconds until fast
reverse starts.
● To skip to the beginning of the current track
Press the [ ] button (remote controller beeps).
To skip to the beginning of a previous track, press the
[ ] button multiple times, or hold down the [ ] button
(remote controller beeps). The current track number is
shown on the LCD.
To Next Page
Loading...
Need help?
General
