70
Advanced Settings
Procedure
[r] (REC) * [MENU] * Quality Tab * EV Shift
You can manually adjust an image’s exposure value (EV value) before shooting it.
• Exposure Compensation Range: –2.0EV to +2.0EV
• Unit: 1/3EV
1. Use [8] and [2] to adjust the exposure compensation value.
To cancel exposure compensation, change the EV
value to 0.0.
2. Press [SET].
This applies the exposure compensation value.
The exposure compensation value you set remains
in effect until you change it.
NOTE
• When shooting under very dark or very bright conditions, you may not be able to
obtain satisfactory results even after performing exposure compensation.
Correcting Image Brightness (EV Shift)
[8]:Increases the EV value. A higher EV
value is best for light-colored subjects
and backlit subjects.
[2]:Decreases the EV value. A lower EV
value is best for dark-color subjects and
for shooting outdoors on a clear day.
Exposure compensation
value
To Next Page
Loading...
Need help?
General
