To recall the contents of variable A
(Continuing) (A) 8
To clear the contents of variable A
0 (STO) (A) 0
Independent Memory (M)
You can add calculation results to or subtract results from independent
memory.
The "M" indicator appears on the display when there is any value other
than zero stored in independent memory.
Example:
To clear the contents of M
0 (STO) (M) 0
To add the result of 10 × 5 to M
(Continuing) 10 5 50
To subtract the result of 10 + 5 from M
(Continuing) 10 5 (M-) 15
To recall the contents of M
(Continuing) (M) 35
Note
•
Variable M is used for independent memory.
Clearing the Contents of All Memories
Ans memory, independent memory, and variable contents are retained
even if you press
, change the calculation mode, or turn off the
calculator.
Perform the following procedure when you want to clear the contents of all
memories.
(CLR) (Memory) (Yes)
26
To Next Page
Loading...
Need help?
General
