Stopwatch
The stopwatch can measure elapsed time up
to 23 hours, 59 minutes, 59 seconds (24
hours).
Measuring Elapsed Time
1. Enter the Stopwatch Mode.
l
Navigating Between Modes
2. Use the operations below to measure
elapsed time.
●
Elapsed time is shown in 1/100-second
units for the first hour of the
measurement. After the first hour,
elapsed time is shown in one-second
units.
Hour, minute, secondMinutes, seconds,
1/100 seconds
First hour After first hour
3. Press (A) to reset the stopwatch to all
zeros.
Measuring a Split Time
1. Enter the Stopwatch Mode.
l
Navigating Between Modes
2. Use the operations below to measure
elapsed time.
●
Pressing (A) displays the elapsed time
from the start of a race up to the point
when you pressed the button (split
time).
D
A
A
D
Stop
Split release
Split
Start
●
Elapsed time is shown in 1/100-second
units for the first hour of the
measurement. After the first hour,
elapsed time is shown in one-second
units.
Hour, minute, secondMinutes, seconds,
1/100 seconds
First hour After first hour
3. Press (A) to reset the stopwatch to all
zeros.
Timing the First and Second
Place Finishers
1. Enter the Stopwatch Mode.
l
Navigating Between Modes
2. Use the operations below to measure
elapsed time.
D
A
D
2nd Finisher*
1st Finisher*
Start
* This displays the time of the first
finisher.
●
Elapsed time is shown in 1/100-second
units for the first hour of the
measurement. After the first hour,
elapsed time is shown in one-second
units.
Hour, minute, secondMinutes, seconds,
1/100 seconds
First hour After first hour
3. Press (A) to display the time of the second
finisher.
4. Press (A) to reset the elapsed time to all
zeros.
Watch Operation Guide 3495
15
To Next Page
Loading...
Need help?
General
