Casio HT-6000 User Manual

Chord/Operation Memory
® Press either the CHORD
or OPERATION selector to
specify which type of
program you're going to
enter into memory.
@ Press the st art/stop key to
begin rhythm track (you
can also use the synchro .) '
function) .
The rhythm track starts
after a one-measure count.
When synchro start is set,
the rhythm track starts
immediately after any key
below the selected
keyboard split point is
pressed.
In this status, programming
has already begun. Program
chord or operation memory
via real-time operation,
playing chords via Casio
Chord, or performing desired
operations.
You can clear former
contents from the memory
by pressing the start/stop key
on ce aga in during the one-
mea sure intro co unt.
® Press start/stop key or
ending key to end
programming.
@Press the select key as
l necessary to exit from the
chord/operation
programming mode.
'u
CHORD
C=::J
TART/
STOP
- I
c= I = I or c:::::::J
START/ INTRO/
STOP ENDING
-,
\ - - Goes
2
o~t
I INTER NA L CARD c:::::::::::J
SELECT
-52-
* When memory c apacity is
exceeded, rhyth m stops -
and 2 LEDs above start/ , ,,
sio p ' key light together.
Press the start/stop key to
exit from this state.

Casio HT-6000 Specifications

General

Brand	Casio
Model	HT-6000
Category	Electronic Keyboard
Language	English