E-18
Sampling Sounds and Playing Them on the Digital
Keyboard
You can sample a sound from a microphone, a portable audio
player, or other device, and then play the sound with keyboard
keys. For example, you could sample the bark of your dog
and then use the sound in a melody. You also can sample and
use passages from a CD. The sampling feature is a great way
to create new sounds that are highly creative.
• Before connecting, make sure that the Digital
Keyboard, external devices, and/or the microphone all
are turned off.
1.
Connect a microphone or external device to the
Digital Keyboard.
• You also could connect a commercially available
microphone.
• Connection of an external device requires commercially
available connecting cords, supplied by you. Connecting
cords should have a stereo mini plug on one end and a plug
that matches the configuration of the external device on the
other end.
2.
Turn down the volume levels of the external
device and the Digital Keyboard.
3.
Turn on the external device or microphone, and
then turn on the Digital Keyboard.
• When using a microphone, adjust the input volume
level with
3
.
• It will take a few seconds after you turn on the Digital
Keyboard before you will be able to use the microphone.
• Sampled sounds are recorded in monaural.
btbtckckclcl cmcm cncn coco cscs ctct
bqbq
bsbs
bpbp3311
Connection and Preparation
MIC IN jack
Digital Keyboard AUDIO IN jack
CD player, Cassette player,
etc.
Stereo mini plug
To Next Page
Loading...
Need help?
General
