E-20
Playing a Built-in Tune
To play back a Piano Bank tune
1
Find the tune you want to play in the PIANO BANK
List, and note its number.
• See page A-9 for the PIANO BANK List.
2
Press the PIANO BANK button to specify the Piano
Bank group.
NOTE
• Pressing the PIANO BANK button changes the tone to
STEREO GRAND PIANO (Tone Number 000).
3
Use the number buttons to input the two-digit tune
number you looked up in step 1.
Example: To select tune number 44 (ODE TO JOY), input
4 and then 4.
NOTE
• Tune Number 00 is the initial default Piano Bank tune
setting whenever you turn on keyboard power.
• You can also change the displayed tune number using
the [+] and [–] buttons.
4
Press the PLAY/STOP button to start playback.
5
To stop playback, press the PLAY/STOP button.
• The tune you select continues to play until you stop
it.
Musical Information System
When the keyboard is playing one of its built-in tunes, the
display shows a variety of information about the tune.
Example: Display during Song Bank play
NOTE
• Chord names are not displayed for Piano Bank tunes.
Adjusting the Tempo
The tempo (beats per minute) can be set to a value in the
range of 30 to 255. The tempo value you set is used for Song
Bank, Piano Bank, karaoke, 3-step lesson, and Auto
Accompaniment chord play, as well as playback from Song
Memory, memory card, and metronome operation.
To set the tempo
1
Use the TEMPO buttons to set the tempo.
: Increases the tempo value.
: Decreases the tempo value.
NOTE
• While the tempo value is flashing, you can also use the
number buttons or [+] and [–] to input a three-digit value.
Note that you must input leading zeros, so 90 is input
as 090.
• Pressing both the and TEMPO buttons at the same
time automatically returns the currently selected rhythm
to its default tempo.
• Piano Bank tunes have tempo changes part way through
in order to produce specific musical effects.
OdeTo
oJ
y
Indicator appears
Aloha
O
e
Fingering
Staff display
Chord name
Flash
Tempo value
664A-E-022A
To Next Page
Loading...
Need help?
General
Weight and Dimensions
