— 14 —
● PROCEDURE
<PC side>
1 After setting up FA-128 PC LINK software to your PC in accordance with User's Guide, connect
SF-5590SY/5790SY/5990SY to PC using cable for data transmission.
2 Open FA-128 PC LINK software.
3 Select Options in Menu Bar, then Default Digital Diary... .
4 Select available Digital Diaries (for example, SF-5590SY), then OK.
5 Select Casio, then Synchronization Setup... .
6 Perform Setup for Synchronization in accordance with User's Guide.
At this time, be sure to select Detect Automatically Synchronization Start.
After setting up, select OK.
7 Select Casio, then Transmission Setup... .
8 Select Serial Port (for example, COM1) which you use with PC, then OK.
To synchronize data for a single mode
<Digital Diary side>
9 Press the Digital Diary's SYNCHRONIZE button.
0 Press the mode button for the mode whose data you want to synchronize
(TEL, MEMO, SCHEDULE, TO DO, REMINDER, EXPENSE) to start.
● You can press ESC button to abort the above procedure.
<PC side>
A The dialog box for Start Synchronization appears. Select OK.
If the dialog box for Different Synchronization Information appears, for example, select "A Rec-
ognition And Filter Duplicate Records", then OK.
B Synchronization starts to run (0 %➔100 %).
<Digital Diary side>
C The Home Time screen appears when the synchronization operation finishes.
To synchronize data for all mode
● All-mode synchronization takes a long time to complete.
9 Press SHIFT, then SYNCHRONIZE button to start synchronization of all modes.
<PC side>
0 The dialog box for Start Synchronization appears. Select OK.
If the dialog box for Different Synchronization Information appears, for example, select "A Rec-
ognition And Filter Duplicate Records", then OK.
A Synchronization starts to run (0 %➔100 %).
<Digital Diary side>
B The Home Time screen appears when the synchronization operation finishes.
To Next Page
Loading...
Need help?
General
