7
Introduction & Contents/Getting Started
E
This section outlines how to unpack the cash register and get it ready to operate. You should read this part of
the manual even if you have used a cash register before. The following is the basic set up procedure, along
with page references where you should look for more details.
User'sManual
Getting Started
1.
2.
Remove the cash register from its box.
Make sure that all of the parts and accessories
are included.
Remove the tape holding parts of
the cash register in place.
Also remove the small plastic bag taped to the
printer cover. Inside you will find the mode keys.
Install the three memory
backup batteries.
2. Remove the battery
compartment cover.
Slide the cover and
pull it up.
1. Remove the printer
cover and open the
platen arm.
3.
printer cover
platen arm
battery compartment cover
To Next Page
Loading...
Need help?
General
