Casio V-R7100 User Manual

Connecting the Power Supply and Various Devices
E-27
Installation
4. Fasten the stand to the display with 4
screws.
5. Attach the rear cover to the stand in the
direction of the arrow.
6. Loosen and remove the screws for the
3 cable fasteners at the bottom of the
stand with a Phillips screwdriver.
7. Adjust the routed cables so they will not
sag too much or be too tight. Arrange
the cables so they will not overlap,
and fasten with the cable fastener and
secure with a screw.

Casio V-R7100 Specifications

General

Brand	Casio
Model	V-R7100
Category	Touch terminals
Language	English