To Next PageTo Next PageWhy my Casio Projector does not turn on?
If your Casio Projector isn't turning on when you press the power button, start by checking the POWER/STANDBY indicator. If it's not lit, ensure that the AC power cord is correctly connected to both the projector and the power outlet. However, if the TEMP or LAMP indicator is flashing or lit, it indicates an error.
What to do if Casio Projector does not project any image from the connected device?
If your Casio Projector isn't projecting an image from the connected device, first ensure that the connected computer or video device is turned on and is actively outputting a video signal. If the device is on and outputting a signal, the issue might be that the incorrect input source is selected on the projector. To resolve this, select the input source on your projector that corresponds to the device you are trying to project from.
General| Matrix size | 0.55 \ |
|---|---|
| Number of colors | 16.78 million colors |
| Projection distance | 2.8/5.6 m |
| Projection technology | DLP |
| Contrast ratio (typical) | 1800:1 |
| Screen size compatibility | 15 - 300 \ |
| Projector native resolution | XGA (1024x768) |
| Keystone correction, vertical | -30/30 ° |
| Focus | Manual |
| RMS rated power | 1 W |
| Number of built-in speakers | 1 |
| Dimensions (WxDxH) | 297 x 210 x 43 mm |
| Power requirements | AC100-240V, 50/60Hz |
| Connectivity technology | Wired |
| Microphone in | Yes |
| Serial interface type | RS-232 |
| Power consumption (standby) | 0.4 W |
| Power consumption (typical) | 190 W |
| Product type | Standard throw projector |
Weight and Dimensions| Weight | 2300 g |
|---|
Details hazards related to power cords, water, and electrical shock.
Covers safe locations, ventilation, and avoiding environmental hazards.
Information on lamp life and warnings about unsuitable locations for operation.
Procedures for tilt, focus, zoom, and keystone correction.
Procedures for turning the projector on/off and initial language configuration.
Addresses issues like no power, no image, color problems, and remote control failure.
