5Vessel and Accessories Overview
Vessel and Accessories Overview
The MARSXpress Plus is available in 110 mL PFA and 110 mL TFM plastic liners. For a list of parts and part
numbers, visit our website at www.cem.com. A list of parts can be found on the “Products” page under “MARS 6”.
WARNING
Only use consumables, accessories, vessels and vessel components purchased directly from CEM
or through its authorized dealer network. The use of consumables, accessories, vessels and vessel
components other than original CEM parts will put operators and equipment at risk; therefore, CEM will
not assume any liability for use of these parts and all warranties, either written or implied, will immediately
become void.
Vessel Components
1
3
2
4
Standard Cover
Control Cover*
Item
1 Liner
2 Vessel Plug
3 Cap
4 Sleeve
*The control cover is only available for MARS units with the ber optic temperature control option.
To Next Page
Loading...
Need help?
General
