Challenge Xtreme BVA2400 User Manual

PLUG REPLACEMENT
Your blower vac is fitted with a moulded
plug. However If you need to replace a
fitted plug then follow the instructions
below.
IMPORTANT
The wires in the mains lead are coloured
in accordance with the following code:
Blue - Neutral Brown – Live
As the colours of the wires in the mains
lead of this appliance may not correspond
with the coloured markings identifying the
terminals in your plug, proceed as follows.
The wire which is coloured blue must be
connected to the terminal which is marked
with N
The wire which is coloured brown must be
connected to the terminal which is marked
with the letter L
If a 13AMP (BS1363/A) plug is used, a
13A fuse must be fitted, or if any other type
of plug is used a 13AMP fuse must be
fitted, either in the plug or adapter, or on
the distribution board.
Note: If a moulded plug is fitted and has
to be removed take great care in disposing
of the plug and severed cable, it must be
destroyed to prevent engaging into a
socket.
If the supply cord is damaged it must be
replaced by a service agent or a similarly
qualified person in order to avoid hazard.

Challenge Xtreme BVA2400 Specifications

General

Brand	Challenge Xtreme
Model	BVA2400
Category	Blower
Language	English