Challenge Xtreme BVA2400 User Manual

and turn collar to secure into position.
(Dia.6)
3. Finally attach collection bag support
straps. (Dia.6)
Preparing the Vacuum/Blower For
Use
Note: To avoid detaching power cable
always check that it is attached firmly to
securing hook before using
vacuum/blower.
1. Make a loop with the power cable and
push it into the recess. (Dia.7)
2. Place the end of the end of the loop
round cable securing hook and ensure
it is pulled firmly enough to prevent it
coming loose while operating the
vacuum/blower. (Dia.7)
OPERATION
There are two operating functions as
follows:
BLOWER
This operation enables you to gather
leaves quickly in one location ready to be
vacuumed.
Using the garden vac in the blower
mode
Note: Ensure power On/Off switch (1) is in
the Off position before switching on the
mains power.
1. Connect to the mains supply.
2. Place the carrying strap (3) over your
shoulder and adjust it to suit the
working position.
3. Rotate the function selector to the
“blow” position, ensure selector clicks
into blower position. (Dia.9)
4. Place the vacuum tube in front of you
resting on the support wheels. Slide

Challenge Xtreme BVA2400 Specifications

General

Brand	Challenge Xtreme
Model	BVA2400
Category	Blower
Language	English