Challenge Xtreme CXPHT22 User Manual

8
! Important!
When using the equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating instructions and
safety regulations with due care. Keep this manual in
a safe place, so that the information is available at all
times. If you give the equipment to any other person,
hand over these operating instructions and safety
regulations as well. We cannot accept any liability for
damage or accidents which arise due to a failure to
follow these instructions and the safety instructions.
1. Safety regulations
The corresponding safety information can be found in
the enclosed booklet.
! CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regulations
and instructions may result in an electric shock, fire
and/or serious injury.
Keep all safety regulations and instructions in a
safe place for future use.
Explanation of the warning signs on the
equipment (see Fig. 17)
1. Warning!
2. Read the directions for use before operating
the equipment.
3. Do not expose the hedge trimmer to rain or
wet conditions.
4. Wear eye protection and ear plugs.
5. Wear safety gloves.
6. Wear sturdy, non-slip footwear.
7. Caution: Sharp blades! Always keep hands and feet
away from the blades.
8. Operate and start the equipment only outdoors in well
ventilated areas to reduce the danger of injury from
toxic gases.
9. Explosive material.
10. Very hot surface. Do not touch the hot exhaust
silencer, gearbox or cylinder. You may burn yourself.
These parts have become very hot during operation
and remain very hot over a long period even after the
equipment has been switched off.
11.
Maintain a distance of at least 15 m from other persons .
2. Layout and items supplied (Fig. 1-2)
1. Cutting blade
2. Cutting blade safety cover
3. Safety guard
4. Front handle
5. Choke lever
6. ON/OFF switch
7. Lubrication nipple
8. Gears
9. Fuel pump (primer)
10. Air filter cover
11. Starter handle
12. Rear handle
13. Throttle lever “release”
14. Throttle lever
15. Silencer cover
16. Tank for fuel mixture
17. Spark plug boot
18. Spark plug wrench
19. Oil/ Petrol mixing bottle
20. Cutter rail cover
3. Proper use
Important. This hedge trimmer is suitable for cutting
hedges, bushes and shrubs.
Please note that our equipment has not been designed
for use in commercial, trade or industrial applications.
Our warranty will be voided if the equipment is used in
commercial, trade or industrial businesses or for
equivalent purposes.
The machine is to be used only for its prescribed purpose.
Any other use is deemed to be a case of misuse. The user
/ operator and not the manufacturer will be liable for any
damage or injuries of any kind caused as a result of this.
4. Technical data
Engine type: 2-stroke engine, air-cooled, chrome cylinder
Engine output (max.): 0.65 kW / 0.9 hp
Displacement: 22 cc
Idle speed of engine: 2850 min
-1
Max. engine speed: 8500 min
-1
Weight (with empty tank): 5.6 kg
Cutting length: 50 cm
Tooth spacing: 28 mm
Vibration (front handle) a
hv
7.63 m/s
2
Vibration (rear handle) a
hv
5.01 m/s
2
Sound pressure level L
pA
81 dB
Sound power level L
WA
106 dB
Sound and vibration were measured in accordance with
2000/14/EC.
Helpline No: UK 0151 649 1500 / IRE 189 094 6244

Challenge Xtreme CXPHT22 Specifications

General

Brand	Challenge Xtreme
Model	CXPHT22
Category	Trimmer
Language	English