Quick Start Guide
1
Unpack the Hedge Trimmer
a) Open carton carefully and remove all items
b) Ensure you have all items (see above) before you discard the packaging
3
Starting the Hedge Trimmer
Do you have questions?
We can help
Call Customer Service
Mon-Thur 08:45 am - 5:00 pm
Friday 08:45 am - 3:15 pm
UK: 0151 649 1500
IRELAND: 189 094 6244
Spare Parts also available
Items Included
1 Plug spanner
2 Spanner
3 Mixing Bottle
4 Blade guard
1
2
3
4
2
Fuel / Lubrication
a) Mix the fuel in the mixer bottle provided
b) Shake the container gently to ensure that
it is properly mixed.
N.B Failure to use the correct oil/fuel mixture
will cause the engine to seize
Fuel Mixture is
40:1 (40 parts Fuel
to 1 part 2 stroke oil)
Use regular grade
unleaded petrol
and quality 2 stroke oil
Choke Lever
Fuel Cap / tank
Starter Cord
Primer bubble
Ignition switch
Throttle
lever
a) Add the fuel to the hedge trimmer
b) Set the choke lever ON
c) Secure the throttle lever on
d) Push primer 10 times
e) Pull starter cord rapidly 4 times
f) Switch ignition to “I” (on)
g) Pull the starter cord up to 6 more times
NOTE: amount of choke will vary slightly
Depending on the external temperature.
(Warm = choke off “0”, cold = Choke on “I”)
h) Allow engine to warm up at half throttle for
a short time and then push the choke in fully
To Next Page
Loading...
Need help?
General
