Introduction
1-16 79033095 C Rev.
Fire Extinguisher
FIG. 25: Ensure a fire extinguisher is available. Be
familiar with operation of fire extinguisher. Inspect and
service extinguisher regularly and obey instructions on
instruction plate.
A mounting bracket can be installed on right front frame
rail. Bracket is designed to hold a 4.5 kg (10 lb)
extinguisher.
Ensure all clamps, guards and shields are installed
correctly to prevent vibration, rubbing against other parts
and excessive heat.
Auto-Guide Precautions
Auto-Guide can be momentarily disabled if satellite signal
is lost. it is imperative operator be alert to position and
conditions in field at all times.
Auto-Guide system is designed to aid operator with
machine steering. Operator attention is required at all
times.
Asbestos Information
AGCO equipment and replacement parts shipped from
AGCO are asbestos-free. AGCO recommends use of
only genuine AGCO replacement parts.
Electrical Storm Injury Prevention
When lightning is striking in vicinity of machine, do not
dismount or mount machine.
If in operator's station during an electrical storm, remain
there. If on ground during an electrical storm, stay away
from machine.
FIG. 25
Find manuals at http://best-manuals.com/search?&s=CHAL-79033095
To Next Page
Loading...
Need help?
General
