Chenbro SR301 series User Manual

4-port 12Gb/s SAS/ SATA Backplane - 80H10230101A0 User Manual
Sw1-1
PWM
ON
Enable
OFF
Disable(default)
Table 13.SW1-1: FAN Control Enable/Disable Setting
SW1-2: TEMP Sensor Threshold Setting
The temperature threshold of triggering event warning LED and full fan speed can be
set from this DIP position.
Sw1-2
TEMP
ON
55℃(default)
OFF
65℃
Table 14.SW1-2: TEMP Sensor Threshold Setting
Chapter 4.Technical Support
To quickly answer your technical inquiry, please take note the information shown in the
following sticker label, which can be found on the bottom of chassis inside.
<Need to be replaced>
Next, the detailed system configuration is also helpful to efficiently address the mentioned
issue or duplicate it.
4.1 How to contact us?
There are three ways to submit your technical support inquiry- direct phone call, email and web
site.

Chenbro SR301 series Specifications

General

Brand	Chenbro
Model	SR301 series
Category	Chassis
Language	English