Features
&
Controls
Manual Transfer Case
I
PO1
63
The transfer case shift lever is on the floor
to
the right
of
the driver. Use this
lever
to
shift into and out of four-wheel drive. An indicator light near the lever
shows you the transfer case settings:
2
WHEEL
4
HIGH
N
SET PARKING BRAKE
4
LOW
The front axle portion
of
the diagram on the indicator will light up when you
shift into four-wheel drive. A slight delay between shifting and the pattern's
lighting is normal.
If
the pattern does not light up, or
if
the front axle does
not go out after you shift out
of
four-wheel drive, have your dealer check
your system. Turn the dial above your headlight switch
to
the left
to
dim your
transfer case indicator light when your headlights or parking lights are on.
2
WHEEL: This setting is for driving in most street and highway situations.
Your front axle is not engaged in two-wheel drive.
4
HIGH: This setting engages your front axle
to
help drive your vehicle.
Use
4
HIGH when you need extra traction, such as on snowy or icy roads,
or in most off-road situations.
N
SET PARKING BRAKE: Shift
to
this neutral setting only when your vehicle
needs
to
be towed.
2-28
I
To Next Page
Loading...
Need help?
General
