Driver Information Center (DIC)
The DIC display is located on the instrument panel
cluster above the steering wheel. The DIC can display
information such as the trip odometer, fuel economy and
personalization features.
A
(Trip Information): This button will display the
odometer, personal trip odometer, business trip
odometer, hourmeter, annual log and the timer.
B
(Fuel
Information): This button will display the
current range, average fuel economy, instant fuel
economy and engine oil life.
C
(Personalization): This button will change personal
options available on your vehicle.
3-52
D
(Select): This button resets certain functions and
turns
off
or acknowledges messages on the DIC.
If
your vehicle is not equipped with the DIC steering
wheel buttons you will not have all of the features listed
above, and you will turn
off,
or acknowledge DIC
messages by using the trip odometer reset stem located
on the instrument panel cluster.
DIC
Operation and Displays
The DIC comes on when the ignition is on. After a short
delay the
DIC
will display the current driver and the
information that was last displayed before the engine
was turned
off.
If a problem is detected, a warning message will appear
on the display. Pressing the select button will
acknowledge any current warning or service messages.
The DIC has different modes which can be accessed
by pressing the four buttons on the DIC. These buttons
are trip information, fuel information, personalization
and select. The button functions are detailed in
the following.
If
your vehicle is not equipped with the DIC steering
wheel buttons not all of the features listed will be
available on your vehicle.
To Next Page
Loading...
Need help?
General
