To operate a manual reclining seatback:
1. Lift the recline lever.
2. Move the seatback to the desired position, then
release the lever to lock the seatback in place.
3. Push and pull on the seatback to make sure it is
locked.
To return the seatback to an upright position, do the
following:
1. Lift the lever fully without applying pressure to the
seatback and the seatback will return to the upright
position.
2. Push and pull on the seatback to make sure it is
locked.
Power Reclining Seatback
The driver’s seat may have a power reclining seatback.
The control used to operate it is located on the
outboard side of the seat cushion rear of the horizontal
power seat control.
• Press control rearward to recline the seatback.
• Press control forward to raise the seatback.
Passenger’s Seat with Manual Recline and Power
Seat Control shown
Driver’s Seat with Manual Lumbar, Power Seat
Control, and Power Recline shown
1-5
To Next Page
Loading...
Need help?
General
