Chevrolet Blazer Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-
15165663) - 2022 - CRC - 6/2/21
70 Seats and Restraints
.
If the position you are using does not
have a head restraint and you are
using a single tether, route the tether
over the seatback.
.
If the position you are using does not
have a head restraint and you are
using a dual tether, route the tether
over the seatback.
.
If the position you are using has an
adjustable head restraint and you are
using a single tether, raise the head
restraint and route the tether under
the head restraint and in between
the head restraint posts.
.
If you are using a dual tether in the
rear outboard seating position with
an adjustable head restraint, route
the dual tether around the head
restraint.
If the child restraint is installed next
to a center seat, make sure the top
tether does not interfere with the
center seating position shoulder belt/
retractor. If it does, find another
suitable seating position to install the
child restraint.
3. Make sure the child restraint top tether
hook is completely closed and secured to
the top tether anchor.
Securing Child Restraints (With
the Seat Belt)
The rear seats are the most convenient
location to fasten a child restraint. See
Where to Put the Restraint 0 65.
Infants and children should be placed in the
rear seat and properly restrained, according
to the terms in this manual.
{
Danger
NEVER use a rearward-facing child
restraint on a seat protected by an
ACTIVE AIRBAG in front of it; DEATH or
SERIOUS INJURY to the CHILD can occur.