In Brief 11
Reclining Seatbacks
To recline the seatback:
1. Lift the lever.
2. Move the seatback to the
desired position, and then
release the lever to lock the
seatback in place.
3. Push and pull on the seatback
to make sure it is locked in
place.
To return the seatback to the upright
position:
1. Lift the lever fully without
applying pressure to the
seatback, and the seatback will
return to the upright position.
2. Push and pull on the seatback
to make sure it is locked.
See Reclining Seatbacks 0 45.
Second Row Seats
The rear seatbacks can be folded
down to increase cargo space.
See Rear Seats 0 47.
Head Restraint
Adjustment
Do not drive until the head restraints
for all occupants are installed and
adjusted properly.
To achieve a comfortable seating
position, change the seatback
recline angle as little as necessary
while keeping the seat and the head
restraint height in the proper
position.
See Head Restraints 0 43 and Seat
Adjustment 0 45.
Safety Belts
Refer to the following sections for
important information on how to use
safety belts properly.
.
Safety Belts 0 49.
.
How to Wear Safety Belts
Properly 0 50.
.
Lap-Shoulder Belt 0 51.
.
Lower Anchors and Tethers for
Children (LATCH System) 0 74.