Cisco 1841 User Manual

2
Cisco 1841 Integrated Services Router with AIM-VPN/BPII-Plus and Cisco 2801 Integrated Services Router with AIM-VPN/EPII-Plus
OL-8719-01
Introduction
• Obtaining Documentation, page 23
• Documentation Feedback, page 24
• Cisco Product Security Overview, page 24
• Obtaining Technical Assistance, page 25
• Obtaining Additional Publications and Information, page 26
References
This document deals only with operations and capabilities of the Cisco 1841 and Cisco 2801 routers in
the technical terms of a FIPS 140-2 cryptographic module security policy. More information is available
on the routers from the following sources:
• The Cisco Systems website contains information on the full line of Cisco Systems routers. Please
refer to the following website:
http://www.cisco.com/en/US/products/hw/routers/index.html
• For answers to technical or sales related questions please refer to the contacts listed on the Cisco
Systems website at
www.cisco.com.
• The NIST Validated Modules website (http://csrc.nist.gov/cryptval) contains contact information
for answers to technical or sales-related questions for the module.
Terminology
In this document, the Cisco 1841 or Cisco 2801 routers are referred to as the router, the module, or the
system.
Document Organization
The Security Policy document is part of the FIPS 140-2 Submission Package. In addition to this
document, the Submission Package contains:
• Vendor Evidence document
• Finite State Machine
• Other supporting documentation as additional references
This document provides an overview of the routers and explains their secure configuration and
operation. This introduction section is followed by the
“Cisco 1841 and Cisco 2801 Routers” section on
page 3, which details the general features and functionality of the router. The “Secure Operation of the
Cisco 1841 or Cisco 2801 router” section on page 21 specifically addresses the required configuration
for the FIPS-mode of operation.
With the exception of this Non-Proprietary Security Policy, the FIPS 140-2 Validation Submission
Documentation is Cisco-proprietary and is releasable only under appropriate non-disclosure agreements.
For access to these documents, please contact Cisco Systems.

Cisco 1841 Specifications

General

Flash memory	32 MB
Internal memory	128 MB
Product color	Black, Blue, Stainless steel
Rack capacity	1U
LED indicators	Yes
Storage temperature (T-T)	-25 - 65 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	10 - 85 %
Cabling technology	10/100Base-T(X)
Networking standards	-
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet interface type	Fast Ethernet
USB ports quantity	1
Ethernet LAN (RJ-45) ports	2
Firewall security	Cisco IOS
Security algorithms	128-bit AES, 192-bit AES, 256-bit AES, 3DES, DES
Dual-band	No

Weight and Dimensions

Depth	274 mm
Width	343 mm
Height	47.5 mm
Weight	2800 g