Cisco 3.3 User Manual

Chapter 10 System Configuration: Authentication and Certificates
Cisco Secure ACS Certificate Setup
10-34
User Guide for Cisco Secure ACS for Windows Server
78-16592-01
Before You Begin
For information about the options on the Global Authentication Setup page, see
Authentication Configuration Options, page 10-27.
To configure authentication options, follow these steps:
Step 1 In the navigation bar, click System Configuration.
Step 2 Click Global Authentication Setup.
Cisco Secure ACS displays the Global Authentication Setup page.
Step 3 Configure options, as applicable. For more information about the significance of
the options, see Authentication Configuration Options, page 10-27.
Step 4 If you want to immediately implement the settings you have made, click Submit
+ Restart.
Cisco Secure ACS restarts its services and implements the authentication
configuration options you selected.
Step 5 If you want to save the settings you have made but implement them later, click
Submit.
Tip You can restart Cisco Secure ACS services at any time by using the
Service Control page in the System Configuration section.
Cisco Secure ACS saves the authentication configuration options you selected.
Cisco Secure ACS Certificate Setup
This section contains the following topics:
• Installing a Cisco Secure ACS Server Certificate, page 10-35
• Adding a Certificate Authority Certificate, page 10-37
• Editing the Certificate Trust List, page 10-38
• Managing Certificate Revocation Lists, page 10-40
• Generating a Certificate Signing Request, page 10-45

Cisco 3.3 Specifications

General

Brand	Cisco
Model	3.3
Category	Software
Language	English