Cisco 3.3 User Manual

Appendix D CSUtil Database Utility
Creating a CiscoSecure User Database
D-8
User Guide for Cisco Secure ACS for Windows Server
78-16592-01
• To restore only the system configuration, type:
CSUtil.exe -r config filename
where filename is the name of the backup file. Press Enter.
CSUtil.exe displays a confirmation prompt.
Step 3 To confirm that you want to perform a restoration and to halt all Cisco Secure
ACS services during the restoration, type Y and press Enter.
CSUtil.exe restores the specified portions of your Cisco Secure ACS data. This
process may take a few minutes.
Note If the backup file is missing a database component, CSUtil.exe displays
an error message. Such an error message applies only to the restoration of
the missing component. The absence of a database component in a backup
is usually intentional and indicates that the component was empty in
Cisco Secure ACS at the time the backup was created.
Creating a CiscoSecure User Database
You can use the -n option to create a CiscoSecure user database.
Note Using the -n option requires that you stop the CSAuth service. While CSAuth is
stopped, no users are authenticated.
Caution Using the -n option erases all user information in the CiscoSecure user database.
Unless you have a current backup or dump of your CiscoSecure user database, all
user accounts are lost when you use this option.

Cisco 3.3 Specifications

General

Brand	Cisco
Model	3.3
Category	Software
Language	English