Cisco 3.3 User Manual

14-15
User Guide for Cisco Secure ACS for Windows Server
78-16592-01
Chapter 14 Network Admission Control
NAC Databases
Step 6 Click Configure.
Caution If you click Delete, the selected NAC database is deleted.
Cisco Secure ACS displays the Expected Host Configuration page for the selected
NAC database.
Step 7 Configure mandatory credential types. To do so, follow these steps:
a. Under Mandatory Credential Types, click Edit List.
The Edit Credential Types page appears.
b. For each credential type that you want to require for validation with this NAC
database, select the credential type in the Available Credentials list and click
the right arrow (-->).
The credential type appears in the Selected Credentials list.
Tip To remove a credential type from the Selected Credentials list, select it
and click the left arrow (<--).
c. Click Submit.
The Expected Host Configuration page for this NAC database reappears.
The Mandatory Credential Types table lists the selected credential types.
Cisco Secure ACS will use this NAC database for posture validation only when
the validation request contains attributes for the credential types displayed in the
Mandatory Credential Types table.
Step 8 Select the policies that Cisco Secure ACS must use to validate NAC clients with
this NAC database. You can select local policies, external policies, or both. To do
so, follow these steps:
a. Click either Local Policies or External Policies, as applicable.
A policy selection page displays Available Policies and Selected Policies
lists.

Cisco 3.3 Specifications

General

Brand	Cisco
Model	3.3
Category	Software
Language	English