EasyManuals Logo

Cisco 3700 series User Manual

Cisco 3700 series
114 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background image
2-3
Cisco 3700 Series Routers Hardware Installation Guide
OL-2180-07
Chapter 2 Preparing to Install the Router
General Site Requirements
Caution For the safety of your equipment, periodically check the resistance value of the antistatic strap. It should
be between 1 and 10 megohms (Mohm).
General Site Requirements
This section describes the requirements your site must meet for safe installation and operation of your
router. Ensure that the site is properly prepared before beginning installation. If you are experiencing
shutdowns or unusually high errors with your existing equipment, this section can also help you isolate
the cause of failures and prevent future problems.
Power Supply Considerations
Check the power at your site to ensure that you are receiving “clean” power (free of spikes and noise).
Install a power conditioner if necessary.
Warning
The device is designed for connection to TN and IT power systems.
Statement
1007
The AC power supply includes the following features:
It autoselects either 110 V or 220 V operation.
All units include a 6-foot (1.8-meter) electrical power cord. (A label near the power cord indicates
the correct voltage, frequency, current draw, and power dissipation for the unit.)
Table 2-1 lists power requirements for Cisco 3700 series routers.
Table 2-1 Power Requirements for Cisco 3700 Series Routers
Router Power Supply Input Power Input Voltage
Cisco 3725 AC 100–240 VAC, 10.0 A, 50–60 Hz 85–264 VAC
DC, nominal 24/48 VDC 24–36 VDC, 9 A, positive or negative input,
single or dual sources
18–72 VDC
36–60 VDC, 4 A, positive or negative input,
single or dual sources
Cisco 3745 AC 100–240 VAC, 10.0 A, 50–60 Hz 85–264 VAC
DC, nominal 24/48 VDC 24–36 VDC, 15 A, positive or negative input 18–72 VDC
36–60 VDC, 7 A, positive or negative input
DC, nominal 48 VDC 48–60 VDC, 10 A, positive or negative input 38–72 VDC

Table of Contents

Other manuals for Cisco 3700 series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 3700 series and is the answer not in the manual?

Cisco 3700 series Specifications

General IconGeneral
Connectivity TechnologyWired
Operating SystemCisco IOS
Operating Temperature32 to 104°F (0 to 40°C)
Storage Temperature-4 to 149°F (-20 to 65°C)
Routing ProtocolsBGP, OSPF, EIGRP, RIP, IS-IS
Network ManagementSNMP, CiscoWorks
Security FeaturesACLs, VPN, Firewall, RADIUS, TACACS+
Product TypeNetwork Router
Data Link ProtocolEthernet, Fast Ethernet, Gigabit Ethernet, Serial, Frame Relay, ATM
Network/Transport ProtocolTCP/IP, UDP
Remote Management ProtocolSNMP, Telnet, SSH
FeaturesQuality of Service (QoS)
WAN InterfacesSerial, ISDN, Frame Relay, ATM
LAN InterfacesEthernet, Fast Ethernet, Gigabit Ethernet
ProcessorMotorola PowerPC
InterfacesVariety of modular interface cards including Ethernet, Fast Ethernet, Gigabit Ethernet, Serial, ISDN, ATM, and Voice/WAN Interface Cards (VICs/VWICs)

Related product manuals