Cisco 6851 Series User Manual

Cisco IP Phone 6851 Series User Guide
12 | P a g e
• IPv4 - IP address of the phone. You can see information on IP address, VLAN ID, Addressing type, IP
status, Subnet mask, Default router, Domain Name Server (DNS) 1, DNS 2 of the phone.
• IPv6 - IP address of the phone. You can see information on IP address, VLAN ID, Addressing type, IP
status, Subnet mask, Default router, Domain Name Server (DNS) 1, DNS 2 of the phone.
• MAC address - Unique Media Access Control (MAC) address of the phone.
• Host name - Displays the current host name assigned to the phone.
• Domain - Displays the network domain name of the phone. Default: cisco.com
• Switch port link - Status of the switch port.
• Switch port config - Indicates speed and duplex of the network port.
• PC port config - Indicates speed and duplex of the PC port.
• PC port link - Indicates speed and duplex of the PC port.
View the Phone Status
Procedure
Step 1 Press Applications .
Step 2 Select Status > Phone Status > Phone Status.
You can view the following information:
• Elapsed time - Total time elapsed since the last reboot of the system
• Tx (Packets) - Transmitted packets from the phone.
• Rx (Packets) - Received packets from the phone.
View the Status Messages on the Phone
Procedure
Step 1 Press Applications .
Step 2 Select Status > Status messages.
You can view a log of the various phone statuses since provisioning was last done.
Note: Status messages reflect UTC time and are not affected by the time zone settings on the phone.
Step 3 Press Back.
View the Line Status
Procedure
Step 1 Press Applications .
Step 2 Select Status > Phone status > Line status.
You can view the status of each line on the phone.

Cisco 6851 Series Specifications

General

Brand	Cisco
Model	6851 Series
Category	IP Phone
Language	English