Cisco 6901 User Manual

22 OL-20826-01
Hookflash
Hookflash allows you to activate features on your phone by quickly pressing and releasing the
hookswitch button on the phone cradle rest.
Use Hookflash to Activate Features
(Cisco Unified IP Phone 6901 only)
You can use hookflash to:
• Answer a call
• Transfer between two calls (when one call is incoming only)
• Initiate a conference call
• Remove a conference participant
Hold
Hold allows you to put an active call into a held state.
Hold and Resume a Call
1. To put a call on hold, press the Hold button .
The Line button flashes green. The party that is put on hold hears the preset music.
2. To resume the call, press the flashing green Line button, press the Speaker button (Cisco Unified
IP Phone 6911 only), or go off hook, if the handset is in the cradle.
Meet Me
Meet Me allows you to call a predetermined number at a scheduled time to host or join a conference.
The conference begins when the host connects. Participants who join the conference before the host
has joined hear a busy tone and must dial again.
The conference ends when all participants hang up; the conference does not automatically end when
the host disconnects.

Cisco 6901 Specifications

General

Brand	Cisco
Model	6901
Category	IP Phone
Language	English