Cisco 7905 User Manual

Action Step 1 Step 2 Step 3 Step 4
Call Block
• Dial *60 or *80
• A voice prompt indicates
whether Call Block is
enabled or disabled
• Press 1 – to enable or
disable Call Block
• Press 2 – to add last call
received to the list
• Press 3 – to add a new #
to the list
• Press 4 – to hear the current
list
• Press 5 – to delete numbers
from the Blocked list
• Press * - to repeat the menu
NOTE: When call blocking is
activated for a specific number,
the caller will hear a recorded
message that you are not
accepting calls.
NOTE: This feature is more
easily configured through the
Xutel ExChange Web Portal.
Intercom
Dialing
There is no Intercom Feature available on the Cisco 7905/7912
Using an
Authorization
Code
• Pickup the handset and dial
9# + the Authorization
code (provided by your
Xutel ExChange System
Administrator)
• When a correct code is
entered, you will hear a
dial tone
• Enter the number you wish
to reach
Using Billing
Codes
• During an active call, dial *02
+ the Billing Code
NOTE: Billing Codes are
provided by your office
management
NOTE: Billing Codes will
appear in the Call Detail Records
(CDR) on the monthly
VoicePipe invoice statement
Xutel ExChange 6 of 10
Cisco 7905/7912 User Manual-v1.0 02/11/05
Xutel ExChange
Xutel ExChange

Cisco 7905 Specifications

General

Brand	Cisco
Model	7905
Category	IP Phone
Language	English