Cisco 7921G Release Notes

Install Firmware Release 1.4(4) on Cisco Unified Communications Manager
Express
You must download the Cisco Unified Wireless IP Phone 7921G, 7925G, 7925G-EX, and 7926G version
1.4(4) firmware image file from the software download center.
Note
•
The Cisco Unified Wireless IP Phone 7921G is supported with Cisco Unified Communications
Manager Express 4.1 and later.
•
The Cisco Unified Wireless IP Phone 7925G and 7925G-EX are supported with Cisco Unified
Communications Manager Express 4.3 and later.
•
The Cisco Unified Wireless IP Phone 7926G is supported with Cisco Unified Communications
Manager Express 8.6 and later.
For more information about this procedure, refer to the “Installing and Upgrading Cisco Unified CME Software”
chapter in the Cisco Unified Communications Manager Express System Administrator Guide at this URL:
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_installation_and_configuration_guides_
list.html
To install the firmware, follow these steps:
Procedure
Step 1
To access the firmware files, go to this URL:
http://www.cisco.com/cisco/software/navigator.html?mdfid=278875240&i=rp
Step 2
Log in to the Tools and Resources Download page.
Step 3
Choose the IP Telephony folder.
Step 4
Choose Unified Communications Endpoints > Cisco Unified IP Phones 7900 Series.
Step 5
Choose Cisco Unified IP Phone 7921G, Cisco Unified IP Phone 7925G, or Cisco Unified IP Phones
7926G.
Step 6
Choose Skinny Client Control Protocol (SCCP) Software.
Step 7
Choose 1.4(4) in the Latest Releases folder.
Step 8
Click Download or Add to cart and follow the prompts.
The files to download are:
•
Cisco Unified Wireless IP Phone 7921G: cmterm-7921-sccp.1-4-4-3.zip
•
Cisco Unified Wireless IP Phone 7925G and 7925G-EX: cmterm-7925-sccp.1-4-4-3.zip
•
Cisco Unified Wireless IP Phone 7926G: cmterm-7926-sccp.1-4-4-3.zip
Step 9
Extract the files from the TAR image , manually copy them to the Cisco Unified Communications Manager
Express TFTP server (router flash), and enable them for TFTP.
Cisco Unified Wireless IP Phone 7921G, 7925G, 7925G-EX, and 7926G Release Notes for Firmware Release
1.4(4)
6
Cisco Unified Wireless IP Phone 7921G, 7925G, 7925G-EX, and 7926G Release Notes for Firmware Release 1.4(4)
Install Firmware Release 1.4(4) on Cisco Unified Communications Manager Express

Cisco 7921G Specifications

General

Brand	Cisco
Model	7921G
Category	IP Phone
Language	English