Cisco 7937G - Unified IP Conference Station VoIP Phone User Manual

A-2
Cisco Unified IP Conference Station 7937G Administration Guide for Cisco Unified Communications Manager 6.0
OL-11560-01 Rev. B0
Appendix A Providing Information to Users Via a Website
How Users Subscribe to Services and Configure Conference Station Features
How Users Subscribe to Services and Configure Conference
Station Features
End users can perform a variety of activities using the User Options web pages. These activities include
subscribing to services, setting up speed dial and call forwarding numbers, configuring ring settings, and
creating a personal address book. Keep in mind that configuring settings on a conference station using
a website might be new for your end users. You need to provide as much information as possible to
ensure that they can successfully access and use the User Options web pages.
Make sure to provide end users with the following information about the User Options web pages:
• The URL required to access the application. This URL is:
http://server_name:portnumber/ccmuser, where server_name is the host on which the web server is
installed, and portnumber is the port number of the web server.
• A user ID, default password, and default PIN are needed to access the application.
These settings correspond to the values you entered when you added the user to
Cisco
Unified Communications Manager (see the “Adding Users to Cisco Unified Communications
Manager” section on page 5-9).
• A brief description of what a web-based, graphical user interface application is, and how to access
it with a web browser.
• An overview of the tasks that users can accomplish using the web page.
You can also refer users to Cisco Unified IP Conference Station 7937G Phone Guide for Cisco Unified
Communications Manager 6.0, which is available at this URL:
http://www.cisco.com/en/US/products/hw/phones/ps379/tsd_products_support_series_home.html
How Users Access a Voice Messaging System
Cisco Unified Communications Manager lets you integrate with many different voice mail messaging
systems, including the Cisco Unity voice messaging system. Because you can integrate with a variety of
systems, you must provide users with information about how to use your specific system.
You should provide this information to each user:
• How to access the voice mail messaging system account.
Make sure that you have used Cisco Unified Communications Manager to configure the Messages
button on the conference station.
• Initial password for accessing the voice messaging system.
Make sure that you have configured a default voice messaging system password for all users.
• How the phone indicates that voice messages are waiting.
Make sure that you have used Cisco Unified Communications Manager to set up a message waiting
indicator (MWI) method.

Cisco 7937G - Unified IP Conference Station VoIP Phone Specifications

General

Brand	Cisco
Model	7937G - Unified IP Conference Station VoIP Phone
Category	Conference System
Language	English