Cisco 867VAE-W User Manual

14 15
2. For ADSL/Naked connections,
tick the box next to ATM0.1 and
then click EDIT in the top right.
If you have an NBN Fibre
connection, please follow the
steps on page 17 instead.
3. Select Primary Secondary
Interface. Enable Primary WAN
Interface should be ticked.
Using a computer that’s connected to your Cisco 867VAE-W router, open your web browser and go to
http://10.10.10.1
You will be prompted for a user name and password, by default these are:
Username: iinet
Password: iinet
Configuring DSL connection settings
1. Once you’ve logged in, you’ll
see your router’s home
page. Select Interface and
Connections.

Cisco 867VAE-W Specifications

General

Brand	Cisco
Model	867VAE-W
Category	Network Router
Language	English