Cisco 8845 User Manual

Adjust the Handset Rest
If your phone is wall-mounted, you may need to adjust the handset rest to ensure that the receiver does not
slip out of the cradle.
Procedure
Step 1
Remove the handset from the cradle and pull the plastic tab from the handset rest.
Step 2
Rotate the tab 180 degrees.
Step 3
Hold the tab between two fingers, with the corner notches facing you.
Step 4
Line up the tab with the slot in the cradle and press the tab evenly into the slot. An extension protrudes from
the top of the rotated tab.
Step 5
Return the handset to the handset rest.
Secure the Phone with a Cable Lock
You can secure the phone to a desktop with a laptop cable lock. The lock connects to the antitheft security
connector on the back of the phone and the cable can be secured to a desktop.
Cisco IP Phone 8811, 8841, 8845, 8851, 8851NR, 8861, and 8865 User Guide for Cisco Unified Communications
Manager 11.0
30
Phone Setup
Adjust the Handset Rest
REVIEW DRAFT - CISCO CONFIDENTIAL

Cisco 8845 Specifications

General

Brand	Cisco
Model	8845
Category	IP Phone
Language	English