Cisco ASR 1002-X Overview And Installation

Figure 4: Cisco ASR 1002-X Router Slot Numbering
SPA slot
2
4Built-in 6x1GE SPA in slot
0
1
ESP
LEDs
5SPA slot 12
SPA slot 33
The Cisco ASR 1002-X Router has an integrated ESP which is not field upgradeable. Depending on the Cisco
optional software license that is installed, the ESP forwarding bandwidth can be software field upgraded from
the default bandwidth of 5 Gbps to 10 Gbps, 20 Gbps, or 36 Gbps. For more information about the software
license, see the Cisco ASR 1000 Series Aggregation Services Routers Release Notes at:
http://www.cisco.com/en/US/docs/routers/asr1000/release/notes/asr1k_rn_rel_notes.html
The following table describes the LEDs on the integrated ESP.
Table 1: Integrated ESP LEDs
Behavior in the Power-Up StateColorLEDLED
Label
No.
All the power supplies are within operational limits.Solid
green
PowerPWR1
Off. The router is in standby mode.Off
The ESP is green when active.GreenActiveACTV2
Code has successfully downloaded, and is operational.GreenSTATUSSTAT3
Boot ROM has successfully loaded.Yellow
Not booted.Red
Will always be off.NoneStandbySTBY4
Cisco ASR 1002-X Router Overview and Installation
5
Cisco ASR 1002-X Router Overview and Installation
Cisco ASR 1002-X Router Slot Numbering

Cisco ASR 1002-X Specifications

General

Brand	Cisco
Model	ASR 1002-X
Category	Network Router
Language	English