EasyManuals Logo
Home>Cisco>Network Router>ASR 9006

Cisco ASR 9006 Overview And Reference Guide

Cisco ASR 9006
170 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #163 background imageLoading...
Page #163 background image
A-9
Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide
OL-17501-09
Appendix A Technical Specifications
Table A-12 lists the DC electrical specifications for the Cisco ASR 9010 Router.
Table A-13 lists the DC electrical specifications for the Cisco ASR 9006 Router.
Table A-12 Cisco ASR 9010 Router DC Electrical Specifications
Description Value
Power modules per system Version 1 power system
Up to six DC power modules per system, three per tray
Version 2 power system:
Up to eight DC power modules per system, four per tray
Total DC input power per
power module
Ve r s io n 1 :
1700 W (1500 W output module)
Ve r s io n 2 :
2300 W (2100 W output module)
Rated input voltage per
power module
–48 VDC nominal in North America
–60 VDC nominal in the European Community
(Range: –40.5 to –72 VDC [–75 VDC for 5 ms])
Input current draw
1
1. For each DC power supply module. Some power/chassis configurations may operate at lower current ratings than those
specified in this table. Contact your Cisco technical representative for more information.
49 A maximum at –48 VDC nominal
39 A maximum at –60 VDC nominal
Source DC service
requirement
1
Sufficient to supply the rated input current. Local codes apply.
Redundancy At least four DC power modules (two per power tray) are required for
N+1 redundancy for a fully configured system (version 1 and
version 2).
Table A-13 Cisco ASR 9006 Router DC Electrical Specifications
Description Value
Power modules per system Version 1 power system
Up to three DC power modules per system
Version 2 power system:
Up to four DC power modules per system
Total DC input power per
power module
Version 1 power system
1700 W (1500 W output module)
Version 2 power system
2300 W (2100 W output module)
Rated input voltage per
power module
–48 VDC nominal in North America
–60 VDC nominal in the European Community
(Range: –40.5 to –72 VDC [–75 VDC for 5 ms])
Input current draw
1
49 A maximum at –48 VDC nominal
39 A maximum at –60 VDC nominal

Table of Contents

Other manuals for Cisco ASR 9006

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR 9006 and is the answer not in the manual?

Cisco ASR 9006 Specifications

General IconGeneral
BrandCisco
ModelASR 9006
CategoryNetwork Router
LanguageEnglish

Related product manuals