Cisco ASR-920-24SZ-IM Installing

Figure 13: Mounting the Cisco ASR-920-24SZ-M, ASR-920-24TZ-M Router on the Wall
When mounting the Cisco ASR 920-24SZ-IM, ASR-920-24SZ-M, ASR-920-24TZ-M Router
vertically, ensure that the power supplies are at the bottom.
Caution
When mounting the ASR-920-24SZ-1M to a wall, you must install the drip tray (Cisco part number
700-47267-01) as shown below to meet IEC 60950-1 product safety requirements.
Caution
To install the drip tray for Cisco ASR-920-24SZ-IM Router, complete the following steps:
Step 2 Place the drip tray below the router as shown in the figure above.
Step 3 Tighten the four screws to affix the drip tray to the wall.
Installing and Removing the Interface Module
The sections describe the installation and removal of interface module on the Cisco ASR-920-24SZ-IM Router.
Installing the Router
14
Installing the Router
Installing and Removing the Interface Module

Cisco ASR-920-24SZ-IM Specifications

General

Brand	Cisco
Model	ASR-920-24SZ-IM
Category	Network Router
Language	English