1-5
Cisco ASR 920 Series Aggregation Services Router Hardware Installation Guide
OL-32751-01
Chapter 1 Cisco ASR 920 Series Aggregation Services Router Overview
Cisco ASR 920 Router Features
Airflow Front to back Front to back
Cable access Front cable access Front cable access
System throughput 32 Gbps 42 Gbps
Power Supply
Modularity None None
Redundant Yes Yes
AC Yes Yes
Power
Specification
115 W 105 W
DC Yes Yes
Power
Specification
110 W 105 W
Operating
Temperature
–40º C to 70º C
Note When using Smart SFPs, the
systems should not operate
beyond 40º C.
Note The temperature range will
vary for supported SFP/SFP+
installed on the router. See the
corresponding SFP/SFP+
documentation for more
details.
–40º C to 70º C
Note When using Smart SFPs, the
systems should not operate
beyond 40º C.
Note The temperature range will
vary for supported SFP/SFP+
installed on the router. See the
corresponding SFP/SFP+
documentation for more
details.
Alarms
• 4 alarm dry contact inputs
(normally open)
• LED indicators for critical, major
and minor alarms
• 4 alarm dry contact inputs
(normally open)
• LED indicators for critical, major
and minor alarms
TDM Support None None
Mounting option
• Front or rear rail 19 inches or 23
inches
• ETSI 300 mm cabinet
• Wall Mount (with only side
mount option).
Note For more information, see
Wall Mounting the
Cisco ASR 920 Series Router
, page 3-9.
• Front or rear rail 19 inches or 23
inches
• ETSI 300 mm cabinet
• Wall Mount (with only side
mount option)
Note For more information, see
Wall Mounting the
Cisco ASR 920 Series Router
, page 3-9.
Port Configuration 12x1G and 2x10G/1G ports 2x1G and 4x10G/1G ports
Port Numbering 4x1G SFP – Port [0:3]
8x1G Combo – Port [4:11]
2x10G – Port [12-13]
2x1G Copper – Port [0:1]
4x10G – Port [2-5]
Table 1-1 Cisco ASR-920-12CZ and Cisco ASR-920-4SZ Router Specifications (continued)
Specification ASR-920-12CZ-A/ASR-920-12CZ-D ASR-920-4SZ-A/ASR-920-4SZ-D
To Next Page
Loading...
Need help?
General
