Cisco ASR-920-4SZ-D Hardware Installation Guide

5
Cisco ASR 920 Series Aggregation Services Router Hardware Installation Guide
OL-32751-01
Preface
The preface describes the revision history, audience, organization, and conventions of the
Cisco ASR 920 Series Aggregation Services Router Hardware Installation Guide. It also lists sources for
obtaining additional information and technical assistance from Cisco.
This document covers the following variants of the Cisco ASR 920 Series Aggregation Services Routers:
• ASR-920-12CZ-A—Four 1G SFP ports, Eight 1G Copper/SFP Combo ports and Two 1G/10G Dual
Rate ports, with fixed redundant AC power supplies
• ASR-920-12CZ-D—Four 1G SFP ports, Eight 1G Copper/SFP Combo ports and Two 1G/10G Dual
Rate ports with fixed redundant DC power supplies
• ASR-920-4SZ-A—Two 1G copper ports and four 10G/1G SFP+/SFP ports with fixed redundant AC
power supplies
• ASR-920-4SZ-D—Two 1G copper ports and four 10G/1G SFP+/SFP ports with fixed redundant DC
power supplies
Document Revision History
The following table lists the major changes made to this document.
Document Audience
This guide is intended for users who are responsible for installing the Cisco ASR 920 Series Aggregation
Services Router. It is intended for users who may not be familiar with the initial configuration and
troubleshooting tasks, the relationship among tasks, or the Cisco IOS software commands necessary to
perform particular tasks.
Release Date Change Summary
Cisco IOS XE Release
3.13.0S
July 29, 2014 First release.

Cisco ASR-920-4SZ-D Specifications

General

Brand	Cisco
Model	ASR-920-4SZ-D
Category	Network Router
Language	English