EasyManuals Logo
Home>Cisco>Network Router>C1121-4PLTEP

Cisco C1121-4PLTEP User Manual

Cisco C1121-4PLTEP
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #62 background imageLoading...
Page #62 background image
CableConnectionPort Type, Color
1
Port or Connection
RJ-11 telephone cablePOTS or ISDN lineRJ-11xDSL
(VDSL2 / ADSL2/2+)
1
Cable color codes are specific to Cisco cables.
Connection Procedures and Precautions
After you have installed the router chassis, perform these steps to connect the WAN and LAN interfaces:
Connect each WAN and LAN to the appropriate connector on the chassis.
Position the cables carefully so that you do not strain the connectors.
Organize cables in bundles so that cables do not intertwine.
Inspect the cables to make sure that the routing and bend radius is satisfactory. If necessary, reposition
the cables.
Install cable ties in accordance with site requirements.
Configure the Router at Startup
After installing the router and connecting the cables, you can configure the router with basic configurations.
For more information on how to configure the router, see the Cisco 1100 Series Software Configuration Guide.
Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router
56
Install and Connect the Router
Connection Procedures and Precautions

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco C1121-4PLTEP and is the answer not in the manual?

Cisco C1121-4PLTEP Specifications

General IconGeneral
DSL WANNo
Ethernet WANYes
Wi-Fi bandDual-band (2.4 GHz / 5 GHz)
Wi-Fi standards802.11a, 802.11b, 802.11g, Wi-Fi 5 (802.11ac)
Top Wi-Fi standardWi-Fi 5 (802.11ac)
WLAN data transfer rate (max)1000 Mbit/s
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.11i, IEEE 802.11r, IEEE 802.1x
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
3G-
USB version3.2 Gen 1 (3.1 Gen 1)
Combo SFP ports quantity1
Ethernet LAN (RJ-45) ports5
Power over Ethernet (PoE) ports quantity2
Security algorithms3DES, 802.1x RADIUS, AES, DES
Flash memory4096 MB
Internal memory typeDRAM
Product colorSilver
Output voltage12 V
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (typical)66 W
Operating altitude0 - 3000 m
Storage temperature (T-T)-20 - 65 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 95 %
Operating relative humidity (H-H)10 - 85 %
Harmonized System (HS) code85176990
Weight and Dimensions IconWeight and Dimensions
Depth226 mm
Width322 mm
Height41.9 mm
Weight1560 g

Related product manuals