Cisco C1121 8PLTEPW Series User Manual

Control SourceDescriptionColorLED
Bezel SideSingle LTE Modem (one
modem with SIM
switch-over capability)
Off: Modem not up or
modem up and no SIM
Amber Steady On:
Modem up, SIM installed
but not active.
Green Blink: LTE data
activity.
Green and AmberLTE DATA/SIM
(C1101-4PLTEPWz
C1101-4PLTEP/C1101-4PLTEPWx)
I/OWLAN Functions3-color LED: Green, Red
& Amber;
WLAN
(C1101-4PLTEPWx)
I/OUSB Console Status
OFF: USB console not
active
ON: USB console active
GreenUSB Console
I/OUSB 3.0 Status
OFF: No USB device
discovered
ON: USB device
discovered
USB activity
GreenUSB 3.0
Reset Button
The actuation of the Reset button is only recognized during ROMMON boot, that is, as the router comes to
the ROMMON prompt.
The Reset button does not require much force to be actuated. The Reset button should be actuated only with
a small implement such as the tip of a pen or a paper clip. When the Reset button is pressed at startup, the
system LED turns green.
For more information, see the "Reset Overview" section of the Cisco 1100 Software Configuration Guide.
Power Supply
C111x Series ISRs support PoE and PoE+ power to endpoints. The product power specifications are as follows:
• AC input voltage: Universal 100 to 240 VAC
• Frequency: 50 to 60 Hz
• Maximum output power: Up to 66W for non-PoE supply and upto 150W for PoE supply
Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router
19
Overview of Cisco 1000 Series Integrated Services Routers
Reset Button

Cisco C1121 8PLTEPW Series Specifications

General

Brand	Cisco
Model	C1121 8PLTEPW Series
Category	Network Router
Language	English